The ZGV Spring loaded safety valves are basicly in structures of Full Lift Safety Relief and Low Lift Safety Relief.

A full lift safety valve is one in which the disc lifts sufficiently, so that the curtain area no longer influences the discharge area. The discharge area, and therefore the capacity of the valve are subsequently determined by the bore area. This occurs when the disc lifts a distance of at least a quarter of the bore diameter. A full lift conventional safety valve is often the best choice for general steam applications.

Full-nozzles are usually incorporated in safety valves designed for process and high pressure applications, especially when the fluid is corrosive. Conversely, the semi-nozzle design consists of a seating ring fitted into the body, the top of which forms the seat of the valve. The advantage of this arrangement is that the seat can easily be replaced, without replacing the whole inlet.

In low lift valves, the disc only lifts a distance of 1/24th of the bore diameter. The discharge area is determined entirely by the position of the disc, and since the disc only lifts a small amount, the capacities tend to be much lower than those of full or high lift valves.

» Sizes: DN15 through DN500
» Body Styles: Flanged, Welded or Threaded
» Pressure Class: ANSI CL150 to CL1500, PN16 to PN260
» Materials in Carbon Steel, Stainless Steel, Duplex Steel or Bronze